Real hardware.
Shipped to real clients.
Five projects across automotive, wearable, and wireless electronics — designed, built, and delivered by FALTRON.
From a zip-tied prototype to electronics hidden inside the product
The client's V1 board was bulky, ran on a cell, and had to be zip-tied to the outside of the steering wheel cover. We redesigned it from scratch into an 18.5 × 30.5 mm board that fits inside the cover, with touch sensing through 3 mm of rubber.
Read the story
Automotive-grade PCB for a diesel DPF controller
We designed the full schematic and layout using only automotive-standard parts, chose components that were actually in stock, and sourced the missing OBD-II connector for the client. He fabricated the board, then came back with a second project.
Read the story
A wired in-car intercom, from idea to shipped device
A US client had an idea for a driver-to-passenger intercom. We designed the enclosure, wrote the ESP32-S3 firmware, built the PCB and tested it in a real car before shipping it to America.
Read the story
Multi-sensor health band on a 32 × 32 mm board
SpO₂, heart rate, IMU, ECG, a shock circuit and 4 vibration motors, all on a compact nRF-based, battery-powered PCB.
Discuss on a Call
A custom battery-powered BLE device, built from scratch
Designed and built from zero for a US startup. Details are confidential under NDA, but we're happy to discuss the approach on a call.
Discuss on a CallGot a project in mind?
Whether you have a full spec or just an idea — we can scope it, design it, and build it.
Start a Free Consultation